Fixed Wireless Access

High speed data

 

Model VP-700 Sectoral Panel Antenna

Power Antenna announces a new line of 700 MHz Fixed Wireless Base Station Antennas for full duplex high speed voice, data, and VoIP transmission in the recently allocated 698 - 806 MHz band.  Like all of our products, these antennas are extremely efficient with high gains and low VSWR.  Typical VSWR is less than 1.10 throughout the desired band and less than 1.05 on frequency to allow maximum throughput and to minimize latency due to high Bit Error Rates.

 

 

The panels include custom mounting brackets to enable sectoral coverage of 60, 90, and 120 degrees.  The mounting brackets are manufactured in plant out of steel and are 'hot-dipped' galvanized for weather protection.  The mounting hardware allows quick and easy installation of the panels, as they are marked for the three coverage options. The simplicity built into the mounts removes the possibility of installation error, such as phase cancellation, due to the improper placement of the individual panels; a common occurrence at multiple antenna installation locations.

 

 

SPECIFICATIONS

Electrical Specifications
Frequency: 698 – 806 MHz
Gain (2 panel system): 15.4dBd @ 55°, 13.3dBd @ 90°, 12.6dBd @ 120° 
Sector Tuning: Pre-fabricated inside antenna and achieved by use of custom mounting brackets
Impedance: 50 ohms
VSWR: 1.1:1 Max, 1.05:1 on frequency tuned
Polarization: Vertical
Max. Input Power: 1000 watts per 2 panel system
Input Connector: N female per panel, 7/8 EIA on power divider @ 1kW input
H-Plane: 60, 90, 120 degrees
E-Plane: 5.5 degrees @60° H, 11° @ 90 & 120 H. to half power points
Downtilt: Any degree of Electrical or Mechanical or combination of both available
 

Mechanical Specifications (single panel)
Dimensions: 500mm wide X 1000mm long X 200mm deep
Windload: 815 N Frontal, 250 N Lateral @ 160 km/h
Weight: 25 lbs. (without mounting hardware)
Mounting: Hot dipped galvanized steel, customized to tower spec or standard pipe OD
Radiating Elements: Structural Aluminum with machined brass connectivity
Reflector: Galvanized sheet metal
Radome: UV stabilized ASA, white standard

 

60 Degree Cov. - Horizontal Plane 90 Degree Cov. - Horizontal Plane 120 Degree Cov. - Horizontal Plane